www.testseek.com  

 
 
Search:   
 

Home » Computers » Printers » 3D-Printers » Snapmaker 3-in-1 3D Printer



Working
Please wait...

  Expert reviews    

Reviews of Snapmaker 3-in-1 3D Printer

Testseek.com have collected 3 expert reviews of the Snapmaker 3-in-1 3D Printer and the average rating is 90%. Scroll down and see all reviews for Snapmaker 3-in-1 3D Printer.
 
(90%)
3 Reviews
Users
-
0 Reviews
90 0 100 3

The editors liked

  • Compact form factor
  • 3D module is surprisingly good
  • Excellent software

The editors didn't like

  • Laser module is underpowered

 

Reviews

page 1 of 1
Order by:
Score
 
  Published: 2018-10-31, Author: James , review by: windowscentral.com

  • Compact form factor, 3D module is surprisingly good, Excellent software
  • Laser module is underpowered

Read the full review »    
Google translate to English »
 
Was this review helpful?   
 
(90%)
 
  Published: 2018-02-19, Author: Mesak , review by: mesak.tw

  • Abstract:  Snapmaker 玩了幾天,當初加購共兩個噴嘴,想說要來替換一下噴嘴,順便看一下噴嘴結構。Snapmaker 的噴頭部件替換官網有 詳細的說明書 ,我有點心急沒仔細看就直接拆噴頭模組了,後來才意識到不用拆太多零組件,幾乎是只要旋下兩個 止付螺絲 就可以替換噴頭。首先你必須要有個噴頭模組,這個當然是必需品然後買的時候就會有附一組噴頭,如果發生堵料或是損耗等問題,直接替換噴頭是最快的方式。要替換 噴嘴 的話必須要有一組 6mm 的外六角扳手,不過最好是使用套筒+套筒扳手,平均施力比較快拆下拆下後的樣子,這次...

Read the full review »
 
Was this review helpful?   
 
-
 
  Published: 2018-01-29, Author: Mesak , review by: mesak.tw

  • Abstract:  月初又不小心踢到一箱大箱子塞在家門口,不拆不知道原來是 KS 募資許久的 Snapmaker 送到拉。Snapmaker 是我第一台 CoreXY 的機種,第一次購買就直接上三合一機種:集合列印、CNC、雷雕於一身,價格相當實惠的 Snapmaker ,為何會看上這小台東西呢?這一切都要從 CR 系列機種說起。剛玩 Flux 的時候,我對列印機的什麽 delta、CoreXY 通通不清楚,只知道這類機器就是個 塑膠擠出機,不是都差不多嗎? 拿到 Flux 之後,認識了一些有在玩 3D印表機的朋友,交流後才...

Read the full review »
 
Was this review helpful?   
 
-
    page 1 of 1  
 
More popular products from the same category


Join our Consumer Panel!

  • Infuence products of the future
  • Up to 4$ per answer
TestSeek will regularly send you survey invites to your email, you choose if and when you participate.

Join now! » (opens in a new window)


×